Give your hands the loving they deserve with these 41 DIY Rings! Because your hands are one of the most noticeable parts of your body, you have to keep them at their finest. Make sure that your hands are always dressed up and decent with these DIY Rings!
JEWEL UP WITH THESE 41 DIY RINGS WITH A STEP BY STEP TUTORIAL:
CREATE A SIMPLE WIRE WRAPPED RING
On days when spending money on needs instead of wants is a must, women sometimes forget to accessorize. After all, accessories cost money. But you can avoid draining a hole in your pockets by creating a simple but dainty ring for yourself using wires!
THE MATERIALS THAT YOU WILL NEED:
To carry out this DIY ring project, you will need the following:
A piece of 21-in of 22 grams of wire.
A ring mandrel made out of plastic or metal.
A flush cutters
A cup burr
A chain nose plier
A mallet made out of rubber, plastic, or rawhide
After gathering the materials listed above, you should now be ready to start your do-it-yourself wired ring!
STEP 1 – ARRANGE AND PLACE YOUR CHOSEN BEAD ON THE WIRE
- Position your chosen 6-8 mm bead onto the center of the wire.
- Round or faceted beads both work well in this project, so feel free to choose either.
STEP 2 – MEASURE YOUR RING SIZE
- Measure your ring size using your ring mandrel.
- Ensure that the ring is a size bigger than your typical ring size, to allow for space for the bead.
STEP 3 – WRAP THE WIRES AROUND THE MANDREL
- Using the mandrel as a mold, wrap the wire of your do-it-yourself ring around 3-4 times.
- Be careful when using a metal mandrel with silver plated wires, since wrapping the wire around it may scratch the silver metal finish.
STEP 4 – GATHER THE WIRE UNDERNEATH THE BEAD
- Gather the circles of wire and place them as close to the bead as possible.
- Carefully gather the wires underneath the bead, to avoid warping the wired ring out of shape.
STEP 5 – WRAP THE BEAD
- Wrap the ends of the wire around the bead in a counter-clockwise direction.
- Each successive wrapping will go underneath the previous wrap.
- Maintain the same tension on both wires.
- Complete 3-4 wire wrappings for better security.
STEP 6 – START TWIRLING THE WIRE
- Carefully and slowly remove the ring from the mandrel.
- Make sure to keep one end of the wire pointing upwards, and the other pointing to downwards.
- Working with the wire pointing upwards, begin by bending to down through the band of the ring.
STEP 7 – FINISH TWIRLING THE WIRE
- Using the chain nose pliers, firmly pull the end of the wire.
- Continue twirling wraps around the four wires to create the band of the ring.
- Keep the coils as tight as you can, using pliers to push them together.
- Keep in mind that the more twirls you wrap, the smaller ring you will end up creating.
- Around 4-5 coils each side should do the trick.
- Turn your ring and repeat the process.
- Do not cut the excess wire yet.
STEP 8 – STRAIGHTEN THE BAND OF THE RING
- Carefully position your wired ring back on the mandrel.
- Do not let your wires to overlap one another.
- Pull the ring downwards as far as you can on the mandrel to keep the wires straight and neat.
STEP 9 – FINISH THE ENDS OF YOUR WIRED RING
- Trim the excess wires.
- Use a cup burr or file to smooth the ends.
- Using your pliers, push the ends downwards to keep the wires from sticking up.
- Be careful not to squeeze too hard, or you will find yourself fixing the ring band once more.
STEP 10 – SHAPE THE RING BAND FOR THE LAST TIME
- Flatten and smoothen out the band after pushing down the ends of the wire.
- Use your rubber mallet and go over the ring band over again to finish straightening the wires. This will keep the ring secured in its finest shape.
ENJOYED THE TUTORIAL ABOVE? HERE’S ANOTHER 40 DIY RINGS TO ACCESSORIZE WITH:
1.) Funk up your hands with these twisted neon DIY rings!
Give your hands a touch of liveliness with a good pop of neon! The twisted neon colored material makes this ring even cuter!
2.) Catch their attention with these clay DIY rings!
This eye-catching ring speaks of richness, but no one would suspect it is actually just a block of coated clay. With this clay ring and a golden coat of color, you can look sweet and simple at the same time, or sport a punk rock look with this ring by mixing other chunky rings on your fingers!
3.) Unleash the chemist in you with these Geode DIY rings!
Prepare to dazzle and leave others in awe by rocking this Geode ring! These bold gold-embellished rocks sure create a stunning statement.
4.) Swish with this Waterfalls DIY rings!
Make a unique statement with this stunning Waterfall ring! All you need is a pair of pliers, chains and patience and you are all set. Use two contrasting colors for the chains for an even more beautiful masterpiece.
5.) Look chic with these stacked copper wire DIY rings!
Rock an effortless chic look by creating this copper wire ring! For an even more powerful statement, add a basic bead to each layered copper wire.
6.) Stack your fingers with these Chain DIY rings!
Wire is not the only material you can stack your fingers with. You can create unique stacked rings using chains as well! For an edgier look, stack different kinds of chains so it is easier to notice the layers. You could also stack chain rings of different colors!
7.) Create designer-inspired DIY rings!
A designer ring may look exquisite but they sure do cost a hefty amount of money. Don’t worry because you can still sport a designer-looking ring by creating an inspired one for yourself instead. Create this blue and golden star bust ring made out of clay, wires and color spray material to rock a runway-worthy look.
8.) Adore your hands with these wired bow DIY rings!
A beautiful ring does not have to be expensive or hard to create. Make one for yourself using pliers and wires! With a bit of patience and a dash of creativity, you can create a cute wired bow ring in a matter of minutes.
9.) Brighten up your hands with these knotted leather DIY rings!
You can also create an adorable ring by using leather! For a quick and simple DIY ring, simply make knots with the leather scraps you already have at home. For an even funkier look, create rings out of colored leather!
10.) Make a sharp statement with Spiked DIY rings!
Glamour up and stand out from the crowd with this truly one-of-a-kind ring! With a single spiky golden stud and sparkling rhinestones embellishments, this ring is definitely a bold statement.
11.) Decorate your DIY rings with nail polish!
All you need to create a detailed ring like the one pictured above is nail polish! With creativity, patience, and a keen eye to details, you will rock this ring in no time!
12.) Opt for a chic Boho look with these stone DIY rings!
Channel the nature lover in you with these nature inspired rings! To create one for yourself, simply paint colorful patterns on smooth solid colored stones. This trick will definitely help you achieve a boho chic ready for coachella any day!
13.) Give your hand a touch of playfulness with these knotted DIY rings!
For an inexpensive yet adorable looking ring to embellish your hands, all you need is a strip of fabric! Tie one basic knot on top of another to create this look. If you are going for a vibrant look, choose a fabric with a pop of neon pink color!
14.) Make a star out of this rock with these wire-wrapped DIY rings!
Who would have thought that a simple rock found on the side of the road could be made into beautiful jewelry? With a combination of creativity and resourcefulness it sure is possible! Simply wrap a gold coated wire around a road rock and BAM! You now have a beautiful unique ring your hands will definitely rock!
15.) Knit a bow for your hands with this DIY ring!
Who says knitting is only for sweaters and mittens? This adorable ring will make you want to knit one for yourself. With just 15 rows of knitting and purling, you too can create this plump bow that will surely make your hands chic.
16.) Craft like a professional with these peachy DIY rings!
A beautiful ring doesn’t need to be made by a professional to look well-crafted! Simply wrap a bead with gold wires for an instant professional-like crafted ring!
17.) Gorgeous looking Crystal DIY rings!
Upgrade your plain rings, turning them from boring to rocking! With Gold plated copper wire and a gorgeous looking crystal, you can make this crystal ring. The result will blow you away!
18.) Sparkle with glittered DIY rings!
Sparkle up and prepare to dazzle anyone who comes your way with this glittered star ring! For this craft, simply use a silicon mold showered with glitter for an ultimate star-studded ring!
19.) Keep it fun with these beaded DIY rings!
Beads are not only essential materials for creating bracelets, you can use them to create rings as well! For a more refined look, choose two to three colored beads for your ring. Keeping the colors well co-ordinated will make the ring look easy on the eyes because simplicity goes a long way!
20.) Prepare to stun with gorgeous crystal-wired DIY rings!
This stunning crystal ring will definitely make anyone’s hands look gorgeous! To create this beautiful craft, simply look for a gorgeous crystal and wire it onto a ring. Simple and easy, eh?
21.) Create a beautiful ring out of zippers!
Zippers are not only a basic material for creating clothes, they can also be used for creating jewelry! Bracelets, headbands, necklaces, you name it! Even this unique ring pictured above is made out of zippers!
22.) Create eye-catching rings out of clay shapes!
Create these eye-catching rings in neon colors with clay shapes! Simply stamp, bake, and glue to create a ring in no time.
23.) Create a funky ring out of bouncy balls!
No one will be able to tell that this golden urchin ring is actually made out of bouncy balls! Re-invent those bouncy balls by adding playful spikes then attach to the ring and coat it with a nice shade of gold.
24.) Keep it classy and simple with wired Chevron DIY rings!
Dress your hands with these classic-looking chevron rings! Simply use a gold wire and bend it in half to achieve the perfect chevron pattern.
25.) Create a stunning ring from stone-caps!
Mix and match natural and industrial materials to create a one-of-a-kind ring! Simply add a turquoise stone to a hardware compression cap for an unexpectedly stunning ring.
26.) Look effortlessly chic with these heart shaped DIY rings!
To keep it effortlessly chic, simply twist, curve and bend a silver wire to create this heart shaped ring!
27.) Create a statement with chunky DIY rings!
The combination of silver, gold and white beads makes a wonderful cocktail ring!
28.) Create layered rings with wires and beads!
Create a double-layered rings with wires and beads! Twist wires with pliers, and embellish them with small beads to create adorable rings like the one pictured above. For more variety, use different colored wires as well.
29.) Create your own chunky chain ring with glue!
Do not be left out of the latest trend. Create chunky chain rings for yourself with broken old rings and a dab of glue!
30.) Sparkle up with glittered mustache DIY rings!
A mustache ring sure makes a funky statement, but why don’t you take it a step further? Throw glitter onto your mustache ring to create a one of a kind piece of jewellery out of something quite ordinary.
31.) Create colorful rings out of colored pencils!
Re-invent and re-purpose old colored pencils by turning them into funky rings!
32.) Create novelty rings out of wooden materials!
This craft may be a bit tricky to create for those who are new to wood working but this project sure is worth a shot for a simple yet astounding ring!
33.) Create polished rings out of clay!
Metallic shades and geometric shapes are not exclusive to silver and metal rings! Combine these two trends by using clay to rock the two trends and save money at the same time.
// Poppy Talk
34.) Create rings in an instant out of safety pins!
Got a lot of safety pins that you no longer use? Re-purpose them into a ring! With wires and pliers, you can re-invent your safety pins into a chic piece of jewelry.
35.) Upgrade wired rings with thread!
Hide the unsightly wire closure with threads! Experiment with colors to see amazing results like the ring featured above. The obmre effect of the two-toned navy and royal blue thread adds so much beauty to the ring.
36.) Create faux gold rings out of adhesive!
Can you believe that these beautiful golden tattoo rings are actually made out of adhesive? Simply paint on a non-toxic adhesive, sticking it directly onto your fingers, then cover it with gold leaf. And voila! You now have a glamorous faux-gold ring!
37.) Create customized rings with wires!
Play with wires for a limitless pool of ring designs! Create different designs with rings made from wires! Twist it to spell your name or to illustrate a sentimental symbol, your only limit is creativity!
38.) Wrap your rings with leather!
Go for a textured ring by wrapping leather onto your ring wires!
39.) Play with textures with Doily fabric rings!
If you think leather is too hard for your skin, then you go for Doily fabrics! Use Doily fabrics for your ring to chanel the Boho chick in you.
40.) Create a bold statement with Stone rings!
Let the natural beauty of stone rings shine! Use naturally beautiful stones to embellish your rings and prepare to be surprised by the bold statement you make while rocking these rings.
With these 41 easy and fun DIY ring tutorials, your hands are now prepared to brave the task of greeting people with confidence!